Impression Materials

Sort by

Zendo Material Cartridge Dispenser Gun 1 unit/box

$155.95

The Zendo Material Dispensing Gun can dispense the perfect ratio of 1:1 for 50 ml Cartridge Impression Material as well as 50 ml Bite Registration Material . This easy to dispense extruder gun along with the German quality material Zendo has to offer , ensures the best reliable outcome for any dental restorative procedure.

Features/Benefits

Easy to dispense, user-friendly , Extruder for 50 ml cartridges of Impression material and Bite Registration Material

Package Contains

1 Zendo Material Dispensing Gun

Product Application:

Only use 0:17 – 1:47

Zendo Mixing Tips for Core Build Up Material, 50 per pack

$50.95

The mixing cannulas are intended for use with light and medium body core build up materials during a procedure. These tips are made in Switzerland.

Place the mixing cannula directly into the preparation and press out the paste. Select CBU is automatically mixed when dispensed with slight and even pressure. Filling should occur from bottom upwards to prevent voids. To facilitate placement of Select CBU place a matrix band around the prepared tooth.

Package contains:

A pack of 50 Zendo Mix Tip Select Core Build Up Light/Med 4.2 - 12d, yellow

Zendo MTA Capsule Gun Dispenser 1 unit/box

$47.95

This is a Standard MTA capsule dispenser gun.

Features/Benefits:

Autoclavable
Stainless steel
Easy to use design
Compatible with most unidose composite capsule tips

Package contains:

1 unit of Zendo MTA Capsule Dispenser Gun

Zendo Select Rigid BR Snap Set HD with Controlled Flow, 2x50ml cartridges + 6 mixing cannulas

$62.95

Select Rigid BR is an extremely hard and fast setting bite registration material. With the Automix-cartridge Select Rigid BR can be syringed directly onto the teeth. The bite registration material is based on addition curing vinyl silicones. Select Rigid BR can be used for centric occlusions. It can also be applied as key material e.g. for taking intraoral registrations with posts. Finally, it can be used for the bite fork technique. Select Rigid BR is very suitable for cutting and contouring because of its extremely high final hardness.

It comes in a convenient cartridge system with 2 cartridges of 50 ml each and 6 mixing canula.

Handling instructions:

The automatically mixed material is applied directly onto the occlusal areas. The bite should be closed within 20 seconds after the beginning of the extruding (working or application time at 23°C or 74 °C). The recommended time in mouth is about 45 seconds.

Features/Benefits:

Controlled Flow™ Technology
Hard, fast setting bite registration material
Snap Set - shorter intra oral setting time with longer working time
Ideal for occlusion and other matrices for all impression taking procedures requiring a rigid, fast setting
45 second snap set with no distortion and greater accuracy
Exceptional elasticity and minimal distortion

Package contains:

Zendo SELECT RIGID BR 2 cartridges 1:1 of 50 ml each + 6 mixing canula

Zendo SELECT SIL FIRM PUTTY, BLUE, FAST SET 2 containers of 400g each + 2 mixing spoons

$116.95

Select Sil Firm Putty is used as a base impression material for the putty/wash impression technique in conjunction with Select Sil Light Body Super Hydrophilic.

Select Sil Firm Putty is a kneadable precision impression material based on addition curing vinyl silicone. Select Sil Firm Putty is easy to mix and not sticky.

It comes in 2 containers of 400G each.

Handling instructions:

Perforated or non-perforated metal or plastic trays may be used with Select Sil Firm Putty. In order to improve adhesion of Select Sil Firm Putty to the tray, a suitable adhesive should be applied according to the corresponding instructions before loading the impression tray. Use equal parts (volume or weight) of base paste and catalyst paste. Take the base paste with the dark measuring spoon and the catalyst paste with the white measuring spoon. Knead until the colour is homogeneous (at least 30 seconds). Load the ready kneaded material into the prepared tray. Insert the loaded tray in the mouth not later than 1:30 minutes (working time at 23°C or 74°F) after start of mix. Maintain position for at least 2 minutes. The fast set takes 2 minutes to set.

Features/Benefits:

Superior hydrophilic wettability and detail in the sulcus area
Unsurpassed dimensional stability for improved accuracy and tear strength
Fast intra oral set times to reduce your patients’ discomfort
Outstanding elastic recovery - keeps its shape after removal from patients’ mouth
Won't distort or expand in disinfecting solutions

Package contains:

Zendo SELECT SIL FIRM PUTTY, BLUE, FAST SET 2 containers of 400g each + 2 mixing spoons

Zendo SELECT SIL FIRM PUTTY, BLUE, REGULAR SET 2 containers of 400g each + 2 mixing spoons

$77.95

Handling instructions:

Perforated or non-perforated metal or plastic trays may be used with Select Sil Firm Putty. In order to improve adhesion of Select Sil Firm Putty to the tray, a suitable adhesive should be applied according to the corresponding instructions before loading the impression tray. Use equal parts (volume or weight) of base paste and catalyst paste. Take the base paste with the dark measuring spoon and the catalyst paste with the white measuring spoon. Knead until the colour is homogeneous (at least 30 seconds). Load the ready kneaded material into the prepared tray. Insert the loaded tray in the mouth not later than 1:30 minutes (working time at 23°C or 74°F) after start of mix. Maintain position for at least 3 minutes. The regular set takes 3 minutes to set.

Features/Benefits:

Superior hydrophilic wettability and detail in the sulcus area
Unsurpassed dimensional stability for improved accuracy and tear strength
Fast intra oral set times to reduce your patients’ discomfort
Outstanding elastic recovery - keeps its shape after removal from patients’ mouth
Won't distort or expand in disinfecting solutions

Package contains:

Zendo SELECT SIL FIRM PUTTY, BLUE, REGULAR SET 2 containers of 400g each + 2 mixing spoons